“Why is the internet speed so slow?” How many times have you heard it in the office? The Internet is an amazing tool, and most companies rely on it very much. So when the Internet speed slows down, it will affect productivity. So what caused the Internet to slow down? Your company’s Wi-Fi may be the problem. To help you, here are seven tips to improve your corporate Wi-Fi.

1. Find the best spot

Wi-Fi is most effective when there is free space between the router and the device you are using. Ideally, this means there are no walls, ceilings, cabinets, or anything that can block the signal. Of course, this is impractical for enterprises, but there are some ways to improve the Wi-Fi signal of enterprises by strategically placing routers.

2. Position your router in a central location

Wi-Fi Connection

By placing the router in a central location, you will reduce the number of walls that affect the signal. Your router can send your Wi-Fi signal in all directions, so by placing it centrally, you can get better Wi-Fi performance in more places. Find a central room where your router can reach your entire premises. If you have multiple floors, the router should be on the middle floor (you will need to use an access point to boost the signal).

3. Don’t put it near a window

If you put your router by a window half of your signal is going outside. That is only useful if you want to connect to your Wi-Fi outside of the office. To maximize your signal move it away from a window so you’re not sending as much signal outside.

4. Don’t put it away

Of course, you want your office to look neat and clean, but placing the router in a closet will weaken the signal. The signal loss is not as serious as going through a wall, but it will still hinder your speed and reduce the signal range. Avoid storing the router in cabinets, cabinets, or other obstacles. These are additional obstacles that your signal must cross.

5. Don’t put your router on the floor

The Wi-Fi signal spreads 360 degrees from your router. If you put it on the ground, you send the signal directly through the ground. So, for the same reason, you don’t want to stay on the roof.

6. Avoid anything electrical or metal

The router will be affected by electrical interference. When placing the router, make sure to place it at least five feet away from electrical equipment such as monitors, TVs, speakers, and desk lamps. Metal containers can severely weaken your signal. The metal acts as a Faraday cage, greatly reducing the performance of the Wi-Fi. Using all these techniques, you want to find a location for your router that is as central and accessible as possible. Surround your device with as much space as possible to get the best signal strength.

7. Boost your Wi-Fi range

Even if you follow all these location tips to find the perfect location, you may not have the coverage you need. Commercial facilities are large spaces, and the common range of routers is 600 to 900 feet, making many buildings too large for routers. Repeaters, range extenders or access points can solve this problem. They can extend the signal of the router and increase your Wi-Fi range. When placing repeaters and extenders, follow the same rules for placing routers.

8. Give your router a break

Sometimes, you can improve performance by letting the router take a break. Turn off the router for a few seconds, then turn it on again. In order to maintain a stable Wi-Fi performance level, you may need to reset your router from time to time.

Read More : Protect Your Organization from Cyber Attacks with these Firewall Features

9. Sharing your Wi-Fi

As you add more devices to the network, your performance will decrease. Connect the device via an Ethernet cable if possible. This provides you with the best connection and speed, while strengthening the Wi-Fi signal of wirelessly connected devices.

10. Save bandwidth

You can only access a certain amount of data per second (this is your bandwidth). Sometimes, you can find different providers, which can provide you with more data per second. Before taking that route, check what is consuming your bandwidth. Two things will take up your bandwidth. Users and applications. Controlling users on Wi-Fi starts with good security. Keep your Wi-Fi password secure and encrypt it to prevent unauthorized users from accessing your network. If you want to provide Wi-Fi to customers, use two different networks. Have a guest access network separate from your main business network. In this way, there are many guests in the building without affecting your Wi-Fi performance in the rest of your business.

Also Read : How you can Save Internet Bandwidth (10 Ways)

11. Try Different Channels

Most companies are surrounded by other companies. These companies also have Wi-Fi and may use the same channel as you. This will reduce the performance of your company’s Wi-Fi network. But you have a simple solution: Wi-Fi routers have many different channels. Go through them and you should be able to find unused passages in nearby buildings.

12. Check Your IT Services Provider

If you have followed all the tips here and you still experience Wi-Fi performance issues, please contact your IT support provider. They can talk to their ISP and find more advanced options to improve their Wi-Fi performance.

Related Post : 5g Network : Complete Analysis